Mechanisms Of Regeneration Research Articles

Li3NaSiO4 as reversible CO2 absorbent: elucidation of performance-governing factors and regeneration mechanism

Li3NaSiO4 as reversible CO2 absorbent: elucidation of performance-governing factors and regeneration mechanism

Technological advances and challenges of reclaimed asphalt pavement (RAP) application in road engineering-a bibliometric analysis from 2000 to 2022.

Reclaimed asphalt pavement (RAP) is a valuable material that can be recycled and reused in road engineering to reduce environmental impact, resource utilization, and economic costs. However, the application of RAP in road engineering presents both opportunities and challenges. This study visually analyzes the knowledge background, research status, and latest knowledge structure of literature related to RAP using scientific metric methods such as VOSviewer and Citespace. The Web of Science (WoS) core collection database identified 2963 research publications from 2000 to 2022. Collaborative networks between highly cited references, journals, authors, academic institutions, countries, and funding organizations are analyzed in this study, along with a co-occurrence analysis of keywords for the RAP research publications. Results showed that the USA has long been a leader in RAP research, China surpassed the USA in annual publication output in 2019, increasing from 2 publications in 2002 to 177 publications in 2022, and has made significant investments in technological aspects. Chang'an University ranked first in total publication output (131 publications, 4.4%). Current major research themes include road performance, recycling technology, regeneration mechanisms, and the life cycle assessment of RAP. In addition, based on cluster analysis of keywords, text content analysis, and SWOT analysis, this study also discusses RAP's challenges and future development directions in road engineering. These findings provide scholars with valuable information to gain insight into technological advances and challenges in the field of RAP.

Molecular Dynamics Simulation and the Regeneration and Diffusion Effects of Waste Engine Oil in Aged Asphalt Binder

In recent years, the potential of waste engine oil (WEO) as a rejuvenator for aged asphalt binders has gained significant attention. Despite this interest, understanding WEO’s regeneration mechanism within aged asphalt binders, particularly its diffusion behavior when mixed with both aged and virgin asphalt binders, remains limited. This study adopts a molecular dynamics approach to constructing models of virgin, aged, and rejuvenated asphalt binders with different WEO contents (3%, 6%, 9%, and 12%). Key properties such as the density, glass transition temperature, cohesive energy density, solubility parameter, viscosity, surface free energy, fractional free volume, and diffusion coefficient are simulated. Additionally, models of rejuvenated asphalt binder are combined with those of aged asphalt binder to investigate mutual diffusion, focusing on the impact of WEO on the relative concentration and binding energy. The findings reveal that WEO notably decreased the density, viscosity, and glass transition temperature of aged asphalt binders. It also improved the molecular binding within the asphalt binder, enhancing crack resistance. Specifically, a 9% WEO content can restore the diffusion coefficient to 93.17% of that found in virgin asphalt binder. Increasing the WEO content facilitates diffusion toward virgin asphalt binders, strengthens molecular attraction, and promotes the blending of virgin and aged asphalt binders.

Chatter Stability of Orthogonal Turn-Milling Process in Frequency and Discrete-Time Domains

Abstract As the industry seeks better quality and efficiency, multitasking machine tools are becoming increasingly popular owing to their ability to create complex parts in one setup. Turn-milling, a type of multi-axis machining, combines milling and turning processes to remove material through simultaneous rotations of the cutter and workpiece with the translational feed of the tool. While turn-milling can be advantageous for large parts made of hard-to-cut materials, it also offers challenges in terms of surface form errors and process stability. Because tool eccentricity and workpiece rotation lead to more complexity in process mechanics and dynamics, traditional milling stability models cannot predict the stability of turn-milling processes. This study presents a mathematical model based on process mechanics and dynamics by incorporating the unique characteristics of the orthogonal turn-milling process to avoid self-excited chatter vibrations. A novel approach was employed to model time-varying delays considering the simultaneous rotation of the tool and workpiece. Stability analysis of the system was performed in both the semi-discrete time and frequency domains. The effects of eccentricity and workpiece speed on stability diagrams were demonstrated and validated through experiments. The results show that the tool eccentricity and workpiece speed alter the engagement geometry and delay in the regeneration mechanism, respectively, leading to significant stability diagram alterations. The proposed approach offers a comprehensive framework for the stability of orthogonal turn-milling and guidance for the selection of process conditions to achieve stable cuts with enhanced productivity.

Multi-Strategy Enhanced Snake Optimizer for Quantitative Structure-activity Relationship modeling

Quantitative structure-activity relationship modeling techniques are widely employed in diverse areas of chemistry, including environmental risk assessment of compounds and virtual screening of drugs. The modeling process entails optimizing the hyper parameters of the model and selecting appropriate molecular descriptors. It is a typical optimization problem with high-dimensional, nonlinear, continuous and discrete variables coexisting. To address this challenge, this paper proposes an enhanced snake optimizer with multiple strategies. First, new food emergence and temperature change mechanisms are introduced to balance the exploration and exploitation. Second, a death and regeneration mechanism is employed to enhance the algorithm's ability to escape from local optima. Third, new formulas for food searching, fighting, mating and eating are designed to simplify the complexity of the algorithm and improve its search efficiency and accuracy. Fourth, the performance of the proposed algorithm is evaluated using the CEC2017 benchmark functions, eight engineering cases with continuous variables, and six feature selection cases with discrete variables. Experimental results demonstrate that the algorithm significantly outperforms comparison algorithms. Finally, the algorithm was applied to quantitative structure-activity relationship modeling for environmental toxicity prediction. Compared with other algorithms, the algorithm can better configure hyper-parameters and select fewer and more effective features for environmental toxicity prediction model. It will be an effective tool to improve the performance of quantitative structure-activity relationship models.

Effective microwave regeneration of natural sepiolite and montmorillonite as adsorbents for tetracycline removal and mechanism insight

Natural clay minerals such as sepiolite (Sep) and montmorillonite (Mt) are used as low-cost adsorbents to remove tetracycline (TC) in water, and the spent adsorbents saturated with TC are regenerated under microwave (MW) irradiation. The adsorption and regeneration properties of Sep and Mt are compared. The possible adsorption and MW regeneration mechanisms are proposed. The results show that 11.25 mg·g−1 and 20.74 mg·g−1 adsorption capacities of Sep and Mt are obtained, respectively, within 120.0 min at 298 K. Mt has higher adsorption capacity, faster adsorption rate and shorter adsorption time for TC than that of Sep. The adsorption processes using Sep and Mt are well-fitted to pseudo-second-order kinetics and Langmuir models. The two adsorption reactions are spontaneous and endothermic, with increased randomness at solid–liquid interfaces. Moreover, 89.76 % and 114.45 % maximum regeneration ratios are obtained for Sep and Mt, respectively. Mt exhibits superior regeneration performance than Sep. After eight adsorption-regeneration cycles, the two adsorbents can maintain excellent adsorption and regeneration performance. This work provides new perspectives on the adsorption technology using natural clay minerals to remove antibiotics and the MW regeneration technology to regenerate spent natural clay minerals saturated with organic pollutants in organic wastewater treatment.

Regeneration Effect of a New Bio-Based Warm-Mix Rejuvenator on Performance and Micro-Morphology of Aged Asphalt.

The use of warm-mix recycling technology can reduce the mixing temperature and the secondary aging of binders in reclaimed asphalt pavement (RAP), which is one of the effective ways to recycle high-content RAP. In this study, the penetration, softening point, ductility, and viscosity were used to characterize the conventional physical properties of aged asphalt after regenerating, while a dynamic shear rheometer (DSR), force ductility tester (FDT), and atomic force microscope (AFM) were used to evaluate the rheological performance and micro-morphology of aged asphalt incorporating a new bio-based warm-mix rejuvenator (BWR) and a commercial warm-mix rejuvenator (ZJ-WR). The regeneration mechanism of warm-mix rejuvenators on aged asphalt was analyzed by Fourier transform infrared spectroscopy (FTIR). The results show that the new bio-based warm-mix rejuvenator can restore the conventional physical properties, low-temperature performance, and micro-morphology of aged asphalt with an appropriate dosage, but it has a negative effect on high-temperature performance. In comparison with 2D area parameters, 3D roughness parameters were more accurate in evaluating the variation in micro-morphology of aged asphalt after regeneration. The FTIR analysis results indicate that both the new bio-based warm-mix rejuvenator and the commercial warm-mix rejuvenator regenerate aged asphalt by physical action, and AS=O and AC-H values are more reasonable than the AC=O value for the restoration evaluation of aged asphalt. And the new bio-based warm-mix rejuvenator has a better regeneration effect on the performance and micro-morphology of aged asphalt than the commercial warm-mix rejuvenator.

Bioactive fiber-reinforced hydrogel to tailor cell microenvironment for structural and functional regeneration of myotendinous junction.

Myotendinous junction (MTJ) injuries are prevalent in clinical practice, yet the treatment approaches are limited to surgical suturing and conservative therapy, exhibiting a high recurrence rate. Current research on MTJ tissue engineering is scarce and lacks in vivo evaluation of repair efficacy. Here, we developed a three-dimensional-printed bioactive fiber-reinforced hydrogel containing mesenchymal stem cells (MSCs) and Klotho for structural and functional MTJ regeneration. In a rat MTJ defect model, the bioactive fiber-reinforced hydrogel promoted the structural restoration of muscle, tendon, and muscle-tendon interface and enhanced the functional recovery of injured MTJ. In vivo proteomics and in vitro cell cultures elucidated the regenerative mechanisms of the bioactive fiber-reinforced hydrogel by modulating oxidative stress and inflammation, thus engineering an optimized microenvironment to support the survival and differentiation of transplanted MSCs and maintain the functional phenotype of resident cells within MTJ tissues, including tendon/muscle cells and macrophages. This strategy provides a promising treatment for MTJ injuries.

Repair and regeneration of the alveolar epithelium in lung injury.

Considerable progress has been made in understanding the function of alveolar epithelial cells in a quiescent state and regeneration mechanism after lung injury. Lung injury occurs commonly from severe viral and bacterial infections, inhalation lung injury, and indirect injury sepsis. A series of pathological mechanisms caused by excessive injury, such as apoptosis, autophagy, senescence, and ferroptosis, have been studied. Recovery from lung injury requires the integrity of the alveolar epithelial cell barrier and the realization of gas exchange function. Regeneration mechanisms include the participation of epithelial progenitor cells and various niche cells involving several signaling pathways and proteins. While alveoli are damaged, alveolar type II (AT2) cells proliferate and differentiate into alveolar type I (AT1) cells to repair the damaged alveolar epithelial layer. Alveolar epithelial cells are surrounded by various cells, such as fibroblasts, endothelial cells, and various immune cells, which affect the proliferation and differentiation of AT2 cells through paracrine during alveolar regeneration. Besides, airway epithelial cells also contribute to the repair and regeneration process of alveolar epithelium. In this review, we mainly discuss the participation of epithelial progenitor cells and various niche cells involving several signaling pathways and transcription factors.

A novel g-C3N4-SH@konjac glucomannan composite aerogel for patulin removal from apple juice and its photocatalytic regeneration

Patulin (PAT) is a hazardous mycotoxin frequently occurs in fruit industry. A reusable g-C3N4-SH@KG composite aerogel for PAT removal in a novel “dark adsorption-light regeneration” mode was prepared by thiol(-SH) functionalization and konjac glucomannan (KG) immobilization. The g-C3N4-SH@KG was characterized by SEM, FT-IR, XPS and UV–Vis DRS, and its PAT adsorption and photocatalytic regeneration behaviors and mechanisms were investigated. The g-C3N4-SH@KG exhibited good regeneration performance, maintaining 83% of PAT initial adsorption capacity (0.92 mg/g) after 5 “adsorption-regeneration” cycles. The adsorption process was endothermic and spontaneous. •OH and h+ generated by photocatalysis were the main substances that degraded PAT into two products and regenerated -SH. The g-C3N4-SH@KG could effectively remove PAT without negative impact on juice quality. The study provided a new strategy for the regeneration of thiol-functionalized PAT adsorbents, and a new idea for the application of non-selective photocatalysis in the control of food contaminations.

Uncovering crystal growth and regeneration mechanism to control crystal morphology: The case study of aceclofenac

The study of crystal growth and regeneration mechanisms is of great significance for controlling the morphology of crystals. Through the investigation of the recovery and regrowth processes of crystals, we have revealed the regeneration mechanism of aceclofenac (ACF) crystals and the influence of hydroxypropyl methylcellulose (HPMC) on the regeneration of ACF crystals. Firstly, ACF crystal regeneration experiments were conducted in acetone (ACT) and methyl acetate (MA), and it was found that the broken crystals could be successfully regenerated and restored to their original morphology, the regenerated ACF crystals in MA exhibited a larger aspect ratio. Secondly, the crystals obtained from the two solvents were placed in different solvents for regrowth, and it was shown that solvent was a key factor influencing the aspect ratio of ACF crystals. Additionally, HPMC was used to regulate the crystal morphology, it was found that the best effect was achieved when the mass fraction of HPMC was 0.5%, resulting in a regenerated crystal with an aspect ratio of only 2.19. Molecular simulation results indicated that the interaction between the radial (110) crystal facet and the solvent was weaker than that with the axial (1 0 -1) crystal facet, leading to a higher radial growth rate and a larger aspect ratio of the crystal. However, after adding HPMC, the interaction between HPMC and the radial (1 1 -1) and (110) crystal facets became stronger. HPMC selectively adsorbed on these two crystal facets, ultimately resulting in crystals with a smaller aspect ratio. The research findings of this study will provide theoretical basis for solving the problem of difficult morphology control due to crystal fragmentation in the pharmaceutical industry production process.

Cotyledonary somatic embryo is one kind of intermediate material similar to callus in the process of in vitro tissue culture from Rosa hybrida ‘John F. Kennedy’

BackgroundRose is recognized as an important ornamental plant worldwide, and it is also one of the most widely used flowers in gardens. At present, the improvement of rose traits is still difficult and uncertain, and molecular breeding can provide new ideas for the improvement of modern rose varieties. Somatic embryos are quite good receptors for genetic transformation. However, little is known about the molecular mechanisms underlying during the regeneration process of rose somatic embryos. To elucidate the molecular regulation mechanism of somatic embryo plantlet regeneration, the relationship between the differences in traits of the two different regenerated materials and the significantly differentially expressed genes (DEGs) related to phytohormone pathways in the process of regeneration were be investigated.ResultsThese representative two regenerated samples from single-piece cotyledonary somatic embryo (SPC) culture of Rosa hybrida ‘John F. Kennedy’, were harvested for transcriptome analysis, with the SPC explants at the initial culture (Day 0) as the control. The differentially expressed genes (DEGs) in the materials from two different types for regeneration approach (SBF type: the regeneration approach type of single bud formed from SPC explants; MBF type: the regeneration approach type of multiple buds formed from SPC explants) were be screened by means of the transcriptome sequencing technology. In this study, a total of about 396.24 million clean reads were obtained, of which 78.95–82.92% were localized to the reference genome, compared with the initial material (CK sample), there were 5594 specific genes in the material of SBF type and 6142 specific genes in the MBF type. The DEGs from the SBF type material were mainly concentrated in the biological processes of GO terms such as phytohormones, substance transport, cell differentiation, and redox reaction. The KEGG enrichment analysis revealed these DEGs were more active in ubiquinone and other terpenoid-quinone biosynthesis, fatty acid elongation, steroid biosynthesis, and glycosphingolipid biosynthesis-globo and isoglobo series. In contrast, the DEGs induced by the MBF type material were mainly associated with the biological processes such as phytohormones, phosphorylation, photosynthesis and signal transduction. According to KEGG analysis, these DEGs of MBF type were significantly enriched in the porphyrin and chlorophyll metabolism, brassinosteroid biosynthesis, carotenoid biosynthesis, and peroxisome. Furthermore, the results from the phytohormone pathways analysis showed that the auxin-responsive factor SAUR and the cell wall modifying enzyme gene XTH were upregulated for expression but the protein phosphatase gene PP2C was downregulated for expression in SBF type; the higher expression of the ethylene receptor ETR, the ethylene transduction genes EBF1/2, the transcription factor EIN3, and the ethylene-responsive transcription factor ERF1/2 were induced by MBF type.ConclusionsAccording to the GO and KEGG analysis, it indicated the DEGs between two different regenerated materials from somatic embryos were significantly different which might be causing morphological differences. That was somatic embryos from Rosa hybrida ‘John F. Kennedy’ could regenerate plantlet via both classic somatic embryogenesis (seed-like germination) and organogenesis, cotyledonary somatic embryos should be considered as one kind of intermediate materials similiar to callus, rather than the indicator materials for somatic embryogenesis.

Synthetic strategy for the production of electrically polarized polyvinylidene fluoride-trifluoroethylene-co-polymer osseo-functionalized with hydroxyapatite scaffold.

The physiological mechanism of bone tissue regeneration is intricately organized and involves several cell types, intracellular, and extracellular molecular signaling networks. To overcome the drawbacks of autografts and allografts, a number of synthetically produced scaffolds have been manufactured by integrating ceramics, polymers, and their hybrid-composites. Considering the fact that natural bone is composed primarily of collagen and hydroxyapatite, ceramic-polymer composite materials seem to be the most viable alternative to bone implants. Here, in this experimental study, copolymer PVDF-TrFE has been amalgamated with HA ceramics to produce composite scaffolds as bone implants. In order to fabricate PVDF-TrFE-HA (polyvinylidene fluoride-trifluoroethylene-hydroxyapatite) composite scaffolds, solvent casting-particulate leaching technique was devised. Two scaffold specimens were produced, with different PVDF-TrFE and HA molar ratios (70:30 and 50:50), and then electrically polarized to observe the subsequent polarization impact on the tissue growth and the suppression of bacterial cell proliferation. Both the specimens underwent characterization to analyze their biocompatibility and bactericidal activities. The bacterial culture of Pseudomonas aeruginosa (P. aeruginosa) and Staphylococcus aureus (S. aureus) bacteria on the composites was studied to understand the antibacterial characteristics. Moreover, MG63 cells cultured on these as-formed composites provided information about osteogenesis. Improved osteogenesis and antibacterial efficacy were observed on both the composites. However, the composite with 70 wt% PVDF-TrFE and 30 wt% HA showed a higher bactericidal effect as well as osteogenesis. It was found that PVDF-TrFE-HA-based biomaterials have the potential for bone tissue engineering applications.

[Research progress in functional regeneration methods and mechanisms of taste buds].

Gustation is one of the most important human senses. Taste dysfunctions, which may be due to aging, tongue cancer surgery, radiotherapy and chemotherapy, affect life quality. That is why the need for taste bud regeneration has received more attention. At present, research on development and renewal of taste cells provides a basis for taste bud regeneration; molecular mechanisms related to taste bud regeneration are being continuously uncoverd, aiding in the identification of more accurate targets for therapy. New methods such as nerve regeneration, tissue engineering, and cytokine therapy have emerged. The author reviews the mechanism and the latest methods of taste bud regeneration of lingual epithelium, aiming to open new horizions for the prevention and treatment of gustatory diseases, and provide theoretical references for its regeneration.

Mgp High-Expressing MSCs Orchestrate the Osteoimmune Microenvironment of Collagen/Nanohydroxyapatite-Mediated Bone Regeneration.

Activating autologous stem cells after the implantation of biomaterials is an important process to initiate bone regeneration. Although several studies have demonstrated the mechanism of biomaterial-mediated bone regeneration, a comprehensive single-cell level transcriptomic map revealing the influence of biomaterials on regulating the temporal and spatial expression patterns of mesenchymal stem cells (MSCs) is still lacking. Herein, the osteoimmune microenvironment is depicted around the classical collagen/nanohydroxyapatite-based bone repair materials via combining analysis of single-cell RNA sequencing and spatial transcriptomics. A group of functional MSCs with high expression of matrix Gla protein (Mgp) is identified, which may serve as a pioneer subpopulation involved in bone repair. Remarkably, these Mgp high-expressing MSCs (MgphiMSCs) exhibit efficient osteogenic differentiation potential and orchestrate the osteoimmune microenvironment around implanted biomaterials, rewiring the polarization and osteoclastic differentiation of macrophages through the Mdk/Lrp1 ligand-receptor pair. The inhibition of Mdk/Lrp1 activates the pro-inflammatory programs of macrophages and osteoclastogenesis. Meanwhile, multiple immune-cell subsets also exhibit close crosstalk between MgphiMSCs via the secreted phosphoprotein 1 (SPP1) signaling pathway. These cellular profiles and interactions characterized in this study can broaden the understanding of the functional MSC subpopulations at the early stage of biomaterial-mediated bone regeneration and provide the basis for materials-designed strategies that target osteoimmune modulation.

Effect of intramyocardial injection of allogeneic biomaterial on the exercise tolerance after destructive injury to the heart muscle (experimental study)

Introduction. The low regenerative potential of the heart prevents replacing dead cardiomyocytes with new cells. It has been shown that cell-free allogeneic biodegradable material (ABM) can increase the efficiency of reparative processes in myocardium and improve its structural and functional state. However, how the physical training capabilities change against this background has not been practically studied. Aim. To evaluate exercise tolerance in rats after the use of ABM. Material and methods. The work was performed on Wistar rats. Myocardial damage was caused by coronary occlusion (CO) and cryodestruction (CD) of the left ventricle apex of the heart. ABM was injected into the CO zone and along the perimeter of the myocardium affected area during CD. Animals with myocardial damage were included in control groups. Rats with myocardial damage and ABM injection constituted the experimental groups. Rats were taken into the experiment 45 days after ABM injection. The physical tolerance of rats was measured using the forced swimming test. Results. It has been shown that the swimming time of rats with СO by 62.5 % and with CD by 37.5 % (p<0.05) is less compared to similar indicators for these animals in the initial (intact) state, which indicates a significant decrease in their exercise tolerance in myocardial damage. Animals with CO or CD on the background of intramyocardial injection of ABM showed 33 % and 48 % longer swimming during the test, respectively. The increase in exercise tolerance of rats against the background of the ABM administration was accompanied by the improvement in the morphometric parameters of the heart. Conclusion. The effect of ABM intramyocardial injection on the endogenous mechanisms of cardiac muscle regeneration is effective and functionally significant.

Understanding the molecular mechanism of regeneration through apoptosis-induced compensatory proliferation studies - updates and future aspects.

AICP is a crucial process that maintaining tissue homeostasis and regeneration. In the past, cell death was perceived merely as a means to discard cells without functional consequences. However, during regeneration, effector caspases orchestrate apoptosis, releasing signals that activate stem cells, thereby compensating for tissue loss across various animal models. Despite significant progress, the activation of Wnt3a by caspase-3 remains a focal point of research gaps in AICP mechanisms, spanning from lower to higher regenerative animals. This inquiry into the molecular intricacies of caspase-3-induced Wnt3a activation contributes to a deeper understanding of the links between regeneration and cancer mechanisms. Our report provides current updates on AICP pathways, delineating research gaps and highlighting the potential for future investigations aimed at enhancing our comprehension of this intricate process.

Distinct features of the regenerating heart uncovered through comparative single-cell profiling.

Adult humans respond to heart injury by forming a permanent scar, yet other vertebrates are capable of robust and complete cardiac regeneration. Despite progress towards characterizing the mechanisms of cardiac regeneration in fish and amphibians, the large evolutionary gulf between mammals and regenerating vertebrates complicates deciphering which cellular and molecular features truly enable regeneration. To better define these features, we compared cardiac injury responses in zebrafish and medaka, two fish species that share similar heart anatomy and common teleost ancestry but differ in regenerative capability. We used single-cell transcriptional profiling to create a time-resolved comparative cell atlas of injury responses in all major cardiac cell types across both species. With this approach, we identified several key features that distinguish cardiac injury response in the non-regenerating medaka heart. By comparing immune responses to injury, we found altered cell recruitment and a distinct pro-inflammatory gene program in medaka leukocytes, and an absence of the injury-induced interferon response seen in zebrafish. In addition, we found a lack of pro-regenerative signals, including nrg1 and retinoic acid, from medaka endothelial and epicardial cells. Finally, we identified alterations in the myocardial structure in medaka, where they lack primordial layer cardiomyocytes and fail to employ a cardioprotective gene program shared by regenerating vertebrates. Our findings reveal notable variation in injury response across nearly all major cardiac cell types in zebrafish and medaka, demonstrating how evolutionary divergence influences the hidden cellular features underpinning regenerative potential in these seemingly similar vertebrates.

Regeneration mechanisms and therapeutic strategies for neuromuscular junctions in aging and diseases

Regeneration mechanisms and therapeutic strategies for neuromuscular junctions in aging and diseases

Hydrogel loaded with thiolated chitosan modified taxifolin liposome promotes osteoblast proliferation and regulates Wnt signaling pathway to repair rat skull defects

To alleviate skull defects and enhance the biological activity of taxifolin, this study utilized the thin-film dispersion method to prepare paclitaxel liposomes (TL). Thiolated chitosan (CSSH)-modified TL (CTL) was synthesized through charge interactions. Injectable hydrogels (BLG) were then prepared as hydrogel scaffolds loaded with TAX (TG), TL (TLG), and CTL (CTLG) using a Schiff base reaction involving oxidized dextran and carboxymethyl chitosan. The study investigated the bone reparative properties of CTLG through molecular docking, western blot techniques, and transcriptome analysis. The particle sizes of CTL were measured at 248.90 ± 14.03 nm, respectively, with zeta potentials of +36.68 ± 5.43 mV, respectively. CTLG showed excellent antioxidant capacity in vitro. It also has a good inhibitory effect on Escherichia coli and Staphylococcus aureus, with inhibition rates of 93.88 ± 1.59 % and 88.56 ± 2.83 % respectively. The results of 5-ethynyl-2 ′-deoxyuridine staining, alkaline phosphatase staining and alizarin red staining showed that CTLG also had the potential to promote the proliferation and differentiation of mouse embryonic osteoblasts (MC3T3-E1). The study revealed that CTLG enhances the expression of osteogenic proteins by regulating the Wnt signaling pathway, shedding light on the potential application of TAX and bone regeneration mechanisms.